Sewing shoes bags for guys or gals in your life is a great gift idea. No matter what sport or hobby you enjoy or where you are traveling. .
Sewing instructions for a shoe bag with lined cord
You are the designer. You can specify the purpose, material, design and size of the string braid. Here are some suggestions.
Use any fabric to your liking. About 1/2 meter Fabric Makes a Shoe Bag
Sturdier fabrics such as jeans, linen, slipcover fabrics, fake trousers, corduroy, etc. work well with sturdier shoes.
fine fabric such as velvet, velvet, flannel, etc. suitable for dressier shoes.
Think of satin or silk on lingerie bags or jewelery bags. Or use a net or terry cloth for the beach or laundry.
Lining is optional. But if you line the bags, choose a compatible liner that does not break easily, especially for larger shoes. Sometimes the same material is the best lining. The instructions are fitted with a lined cord
Washable fabrics may be used to wash the bags later
Cut all the fabrics before cutting
Use a pair of 36-inch long decorative shoe laces or a leather cord for every bag or heavy cord, or to sew your own fabric or fake pants. Ribbon also works
Sew a test kit to find out if the sizes are right for you.
Cut a bag with the following suggested sizes. Insert the shoe and check that it fits well. Add or Remove Length or Width to Set Any Shoes or Objects
Cut 2 golf shoe sacks 4 pieces of 20 cm long and 11 inch fabrics. Knife 4 lining 19 inches long and 10-1 / 2 inches wide
Note: Cut an Extra Cord Bag for a Golf Ball Bag
Two bowling shoes fit into a shoe bag. Cut 2 pieces of fabric 20 cm long and 11 inches wide. Cut 2 lining 19 inches long and 10-1 / 2 inches wide
One bag can hold 2 tennis shoes or 2 ladies' dress shoes
The gym is varied in size. For extra large or small shoes, measure the shoe around and adjust the size of the fabric and the seam allowance to fit the size of the shoe.
Decorate your shoe bag
with a special design or logo bag. Think about bagging or sewing before pattern motif or embroidery. Place the design approx. 3 inches from the bottom in the center of one of the 20 x 11 pieces
After removing the bags, place the two bag pieces in the right part.
Measure and mark the 5 inches on each side of the top of the bag.
Stitch 1/2 inch seam around the bag that begins and stops at 5 inches. Do not put the stitch back on. Use short stitches in the first and last inches
Repeat the seam as described above on the lining
Press all seams on both bags and lining
side edges of the bag.
The bag should be pulled to the right
The lining is to be turned to the right
Machine stitch 1/2 "on the lower lining as if it were a French suture that produces sharp focus
Pulls the wrong side of the lining
Slide the lining into the pouch with the upper edge of the lining 1/2 inches above the top of the bag
Lower the top edge of the bag over the lining 1/2 inch
Press this fold, to make a ring
Now execute the top folded edge of the bag aligned to the side edges of the opening.
For support and stitch, approach this edge of the drive
To make the cover 1 stitch above the previous stitch
] Repeat the back of the bag
Inserting the loops
Use a safety pin or pin to help slide the drawers to the burko
. the rear and front of the bag ending on the same side of the bag
Insert the other tie rod on the other side of the bag by sliding the back of the bag and with the front end
Finishing the lined yoke zip bag
: If the shoe bag suits enough for two shoes, it is advisable to pick up the middle bag from the bottom (but not include) the house on all layers to create separate compartments for each shoe to preserve them
Before stapling and before testing, be sure to have enough space
for the shoes. If not, you can increase the width
from your shoe bag.
Sew bags of any size whatever. Everyone needs a sack
something. Kids love treasure bags. Make big bags and small bags. Give the straps for family and friends with Father's Day, birthday gifts, Christmas gifts, etc. Enjoy sewing roses!
It just makes sense!
Source by sbobet